| |
Thunder Tiger - EB-4 S3 1:8th 4WD Nitro Racing Buggy
 |
 click to enlarge | |
Product No. TTR6230-K10 |
MSRP: $944.99 |
| |
| The new EB-4 S3 is the culminating result from extensive engineering and tremendous research and development by the Thunder Tiger Design Team. |
| |
| Specification:
Length: 496mm / 19.5 in.
Width: 305mm / 12 in.
Height: 180mm / 7.08 in.
Wheelbase: 320mm ~ 330mm
FR/RR Track: 295mm ~ 305mm/300mm
Weight: 3340 g. / 7.4 lbs.
|
|
Innovative engineering enabled the low center of gravity. Combine with high performance suspension to create transition on any track. Along with the help of a manual with computer generated drawings and helpful pro tips; you will have no problem assembling this masterpiece. Leap into the future of the 1:8 scale racing.
Introducing features such as an extruded chassis; the most rigid ever, shocks that are placed in between the upper arms; keeping the shocks away from front damage in case of crash, single fiber discs at the front and rear of the center differential, oversized shock shafts match the current 3.5mm-thick shafts used on the best buggies in the market. Achieving the super low center of gravity, and a new radical engineering of a car construction.
Features
- A7075-T6 front/rear shock tower and steering slider
- Front A-arm with adjustable Pillow-Ball suspension
- AB (Anti-Bumping) shocks with 3.5mm shafts provide various damping and rebounding
- Ultra long, light weight suspension arms
- Small transmission bulkheads with gasket
- Front shocks are protected behind the shock tower and mounted through the upper A-arm
- Graphite front brace, radio tray and center diff top plate
- Unique Delta-Box machined hardened chassis provides more rigidity than a conventional stamped chassis
- Heavy duty CVD universal drive trains (Front/Center/Rear)
- Enclosed radio box protects receiver and batteries from any foreign elements
- Laid down steering servo for low center of gravity
- Complete set of rubber-sealed ball bearings
- Fully adjustable Toe, Caster and Ackerman
- Captured hinge pins no E CLIPS needed,also prevents binding of suspension components
|
Accessories Needed
- Radio Set - 2 Channel radio, x2 High Torque servos, Receiver and battery pack.
- Engine - .21 rear exhaust engine, Glow Fuel (20%), Glow starter, Air filter oil.
- Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Threat locking glue.
- Tools - Hobby knife and blades, Fine-point or felt-tip pen, Small phillips and flat head screw drivers,
Wire cutter, Needle nose pliers, Lexan cutter/Scissors, Silicon oil.
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
