[download flash]  the flash player is required 
 
Optional
50 SE
50 SE
50 SE
 AIRPLANES
 HELICOPTERS
Electric Series
Nitro Series
Raptor 30 v2
Raptor 50 SE
Raptor 50 Titan
Raptor 60 v2
Raptor 90
Raptor 90 SE
Raptor 90 3D
Scale Fuselage
Conversion Kits
Accessories
View All
 MOTORCYCLES
 CARS
 BOATS
 ENGINES
 ELECTRONICS
 APPAREL
 DOWNLOADS
 PRODUCT LINE
ACE HANGAR

Home » Helicopters » Nitro Series » Raptor 90 3D
 
Thunder Tiger - Raptor 90 3D
IN STOCK

click to enlarge
Product No. TTR4892
MSRP: $ 1139.99
 
The new Raptor 90 3D was created for the 3D aficionados. Taking the proven Raptor 90 SE as the foundation, using only the essential parts for extreme 3D flying.
 
Specification:
Full Length of fuselage: 1410mm (55.50")
Full width of fuselage: 190mm (7.50")
Total height: 476mm (18.75")
Main rotor dia: 1605mm (63.25")
Tail rotor dia: 260mm (10.25")
Gear ratio: 8.27:1:4.65
Full equipped weight: 4800g (10.5 lbs)

Added the must-have options for 3D, at lower cost. The CNC machined aluminum rotor hub and 30 grams weight paddles with large control surface area and a thick airfoil makes a lightening fast cyclic responce and rock solid hover. With two different Bell-Hiller mixing ratios offer the pilots a choice of agile, very agile and extremely agile control responses. The Raptor 90 3D is what you need for all-out 3D flying at a minimal invesment.



Features
  • Machined metal main rotor hub
  • New nonlinear stiffness flapping damper
  • Machined metal bearing blocks for main rotor shaft
  • Aluminum seesaw that permits three different Bell-Hiller mixing ratios
  • Bell-Hiller mixing arms with holes for different control sensitivities
  • Light weight 30 grams Hiller control paddles for 3D flying
  • Push/Pull system for collective, roll cyclic and foward/after cyclic control
  • Machined metal foward/after cyclic control lever
  • Carbon graphite 3D vertical fin
  • Light weight tail boom bracket for attaching tail boom support
  • 8.27 to 1 gear ratio for 3D flying ( 91T main gear and 11T pinion )


Accessories Needed
  • Radio Set - Transmitter (6 or more channels), High Speed/Torque Servo x5, Receiver, Battery,
    Switch Harness, Gyro.
  • Engine - Heli engine (90 size), Glow Plug, Glow Fuel (15% - 30%), 1.5V Glow Starter,
    12V Fuel Pump, 12V Battery, 12V Electric Starter, Extended 6mm Hex (starting tool), Remote Glow Plug Extension Glow Plug Wrench, Foam, Rubber Band.

 Note: Raptor is a registered trademark of Thunder Tiger Corp.
Airplanes Helicopters  Motorcycles   Cars   Boats  Engines   Electronics
Company Info Dealer On-Line Become a Dealer Forums Find a Dealer Field Reps Contact Us
Address: 26021 Commercentre, Lake Forest, CA 92630  |  Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone:  949.900.3300   |    Fax: 949.900.3301   |    Customer Service: 866.322.7121

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.