| |
Thunder Tiger - Raptor 50 v2 PRO
| |
Product No. TTR4851-K10 |
MSRP: $719.99 |
w/49BB w/o engine |
To view other available package options, scroll down… |
|
|
The best 50 class 3-d helicopter is now even better!
It is the culminating result from customers' feedback and tremendous research and development effort by the Thunder Tiger Design Team. |
| |
Specification:
Full Length of fuselage: 1200mm (47.24")
Full width of fuselage: 140mm (5.51")
Total height: 412mm (16.25")
Main rotor dia: 1345mm (52.95")
Tail rotor dia: 260mm (10.25")
Gear ratio: 8.5:1:4.56
Full equipped weight: 3000g (6.6 lbs) |
|
This model was designed and engineered by the World-renowned Mr.Shigetada Taya. It combines elements of his previously successful designs with today's advanced technologies.
It is more rugged and has even better flying performance than the original successful Raptor 50.
It has the best power-to-weight ratio of any 50 class helicopters on the market. Buckle your seat
belt and get ready for incredibly fast accelerations and climb rate. With the new main rotor, 3-D pilots
will enjoy executing crisp maneuvers like Climbing Tic-Toc, Chaos, Death Spirals, and any radical maneuvers
that pilots can dream of. Beginners and advanced 3-D fliers will be very impressed.
Features
- Heavy duty collective pitch arm
- Enlarged engine starting shaft from 5mm to 6mm
- Aerodynamic canopy for faster flights
- Metal alloy spring steel clutch with larger diameter
- Extended fan shroud increases cooling effectiveness, and
strengthens the forward sideframe stiffness at the same time
- Main rotor blade spindle enlarged to 6mm provides solid hovering,
responsive 3-D performance and consistent blade tracking
- Main rotor blade radial and thrust bearings enlarged
from 5mm to 6mm for more precise blade pitch control
- Header Tank (60cc) included for consistent engine runs
- High performance 50-size muffler for increased power
- Aluminum swashplate provides strength and minimal freeplay
- Fuel tank re-designed for Raptor .50 v2 with 340cc capacity
- Fuel tank reduces aircraft CG shift and carburetor sensitivity
- Rugged aluminum tail boom supports with plastic ends eliminate fatigue and cracking
- New frames use Raptor 60 style heavy duty double ball bearing for engine starting shaft,
frames also include built-in molded clips for gyro wires
- Re-designed and strengthened sideframes increase crash survivability, and reduce engine vibrations
|
Accessories Needed
- Radio Set - Transmitter (6 or more channels), Servo x5, Receiver, Battery, Switch Harness,
Gyro, Foam, Rubber Band.
- Engine - Heli engine (50-size), Glow Plug, Glow Fuel (15% - 30%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Extended 6mm Hex (starting tool), Remote Glow Plug ExtensionGlow Plug Wrench.Foam, Rubber Band.
|
Also Available
| Product No.: |
TTR4851-K11 - w/49BB w/engine |
MSRP: |
$1174.99 |
Note: Raptor is a registered trademark of Thunder Tiger Corp.
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
click to enlarge 
