|
|
Thunder Tiger - 35% Yak 54-107" - 06
 |
 click to enlarge |
|
Product No. TTR4632-06 |
MSRP: $ 1,009.99 |
| |
Thunder Tiger proudly introduces their new line of TOC Airplanes.
|
| |
| Specifications: |
| Wing Span: 107" |
Wing Area: 2,223 sq. in. |
| Length: 95" |
Weight: 30 lbs. |
| Wing Loading: 31 oz/sq. ft |
Engine: 100cc |
Wingtube: Aluminum 38 x 933mm - 14.6 oz.
Wingtube: Optional Carbon Fiber / Save 6.6 oz.
Stabtube: Aluminum 18 x 49mm - 2.4 oz.
Landing Gear: Aluminum - 15oz.
Landing Gear: Optional Carbon Fiber / Save 5 oz. |
|
|
Our airplanes are built by craftsmen from the best quality balsa and plywood available. Careful consideration of each component material insures light weight structures that are strong enough to stand-up to the most extreme 3D maneuvers.
Each and every airplane is hand built to the highest quality standards. Utilizing proven interlocking building techniques combine with light rigid structures provide great flying airplanes. Components are built in jigs to ensure warp free surfaces such as fuselage, wings, and stabilizers. Proven competition designs for extreme 3D flight are the essence of the Thunder Tiger TOC airplane series. Ace Hobby Distributors, Inc. is proud to be the exclusive distributors of Thunder Tiger TOC Series Airplanes in North America. We are committed to providing quality, service, and value. Contact your local dealer and or Ace Hobby Distributors today for your next 3D/IMAC airplane.
Features
- Designed for precision aerobatics and 3D
- Professionally covered in Ultracote
®
- Strong, Light Weight Construction
- Large control surfaces double beveled for maximum control throw
- Canister and Pipe Ready!
- Heavy duty nylon hinge
- Aluminum Wing Tube
- Aluminum Stab Tube
- Hardware Package Included
- Great vibrant color scheme
- 20 to 30 hours of building time
|
Included Hardware
- Aluminum spinner
- Fuel tank
- Aircraft grade aluminum wing tube
- Aluminum main gear
- Rubber wheels
- Aluminum stab tube for removable stab
- Control horns
- Heavy duty nylon hinges
- Wheel pants
- SAE bolts and nuts
|
Accessories Needed
- Radio Set - 6-Channel computer radio, x8 High torque servos, x1 High speed standard, x2 Heavy duty switches
- Extensions - x2 - 36" / x4 - 24" inch wings, x4 - 12" inch tail, x2 - 6" inch throttle
- Batteries - On board - (2-Cell lithium 3,200 mAh, 6 volt regulator) / Ignition - (2-Cell lithium 2,500 mAh,
6 volt regulator). Or a 5-cell Nimh Packs for ignition and receiver.
- Engine - 100cc Engine
- Adhesives - Zap CA - (Thin), ZAP-A-GAP - (Medium), Slow-Zap CA - (Thick), Formula 560 Canopy glue,
Z-poxy 30 minutes (PT-39).
- Tools - Pliers, Clamps, Crimping pliers, Push-pins, Tape, Sand paper, Screw drivers, Drill and Bits, Marker,
Hobby knife, Ruler, Tape measure, Rotory tool.
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
