|
|
Thunder Tiger - F-8F Bearcat 1/6th Scale
 |
 click to enlarge | |
Product No. TTR4578 |
MSRP: $ 513.99 |
| |
| The F-8F is one of the famous "Cat" family of grumman which is simple and clean with outstanding performance in the air. |
| |
| Specification:
Wing Span: 63" / 1600mm
Length: 49 1/2" / 1250mm
Weight: 9.9 lbs. / 5,400 g.
Req. Engine: .90 - 2 Cycle / 1.20 - 4 Cycle
Req. Radio: 6~8 Channel
|
|
Thunder Tiger proudly introduces one of their finest ARF's to date. The replica of this great airplane, experience this great warbird, the F-8F Bearcat!
Taking the advantage of many lessons learned from carrier duties, the F-8F was develop as an interceptor fighter as well as one of the most successful piston engine aircraft to serve with the U.S. Navy towards the end of the WWII.
Features
- Factory Pre-painted fiberglass fuselage and cowl
- 3 - Blade Aluminum Spinner included
- Covered with Oracover/Ultracote®
- Superlite retract gear with 4.5mm wire included
- Custom made fuel tank
|
Accessories Needed
- Radio Set - Transmitter (6~8 channels), Standard Servos - x6, x2 retract servo (opt),
x2 12' extension wires
and x1 "Y" extension wire for aileron, x1 - 6" extension wire for battery, Receiver, Battery, Foam, Rubber Band.
- Engine - Airplane engine (.90 - 2 Cycle / 1.20 - 4 Cycle), Glow Plug, Glow Fuel (15%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
- Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanoacrylate adhesive (thick CA),
10 minute Epoxy (fast), 20 - 30 minute Epoxy (slow).
- Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers,
Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3.4mm), M4x0.7 Tap, Straight building board, Sanding block.
|
Also Available
| Description: |
Muffler Pitts Style |
Product No.: |
TTR9791 |
MSRP: |
$43.99 |
Parts List
| Part No. |
Description |
Contains |
| AS6291L |
Fuselage |
FRP Fuselage-x1, Rudder-x1, FRP opening cover-x1, FRP tail cover-x1,
2.3x12mm washer wood screw-x4, 2x8mm washer wood screw-x24,
Doubler-x22, CA hinge-x2 |
| AS6302 |
Plywood Parts |
Plywood parts, A, B, C-x1 of each |
| AS6292L |
Main Wing |
Left wing-x1, Right wing-x1, Servo case (L/2, R/2), FRP wing joiner tube-x1,
2.3x12 washer wood screw-x16, CA hinge-x12, 3x20mm button head screw-x2,
Air cooling inlet-x2, Dowel-x4
|
| AS6293L |
Horizontal Tail |
Left H.T.-x1, Right H.T.-x1, FRP tube (1,L), CA hinge-x6, FRP tube (1,S) |
| PE0009 |
EZ Connector |
Hex wrench-x1, EZ connector-x1, M2 nut-x4, 3x3mm set screw-x1, Washer-x1 |
| AS6421 |
Cowling |
Cowling-x1, 2.3x12mm washer wood screw-x6 |
| 3009 |
Superlite Retract |
3x3mm Set screw-x2, Wheel axle-x2, Retracts (L/1, R/1) |
| AS6295L |
Retract Decoration |
Retract door (L/1, R/1), Wheel well (R/1, L/1), Upper door retainer (A/2, B/2),
2x5mm button head wood screw-x4, Lower door retainer-x2,
2.6x5mm button head wood screw-x2 |
| AS6440 |
Hardware Set |
3x16mm wood screw-x8, M2 nut-x2, 3x3mm set screw-x2, Collar-x2,
2x8mm screw-x2, Ball-x1, Ball end-x2 |
| 3024 |
Fuel Tank |
Silicon tub (S/1, L/1), 90° nipple-x1, Straight nipple-x1, crank weight-x1,
Fuel cap-x1, Fuel stopper-x1, Tank-x1 |
| AS6419 |
Canopy & Cockpit |
Canopy-x1, Cockpit-x1, 2x5 wood screw-x1 |
| AS6422 |
Pull-Pull System |
Threaded pushrod-x2, Wire (1, 1.8m), Brass tube-x4, Clevis-x2, M2 nut-x2,
Z-bend END-x2 |
| AS6297 |
Elevator Linkage Set |
Elevator torque rod (L/1, R/1), Pushrod end retainer-x1, Threaded pushrod-x3, Elevator pushrod-x1, M2 nut-x3, Torque rod link-x2, Clevis-x3 |
| 3299 |
Wheel |
Wheel-x2 |
| AS6424 |
Decal |
Decal F8F bearcat (A/1, B/1) |
| AS6443 |
Rudder Linkage Set |
3x3mm set screw-x1, Hinge-x2, Bushing-1, Rudder arm-x1, Rudder torque rod-x1 |
| 3012 |
Anti-Vibration
Engine Mount |
Mounting beam-x2, T Washer-x8, Rubber-x8, 2.4x29mm blind nut-x4,
4x20mm engine mounting screw, Hex wrench-x1, 5x40mm socket screw-x4,
6/32x24mm engine mounting screw-x4 |
| AS6427 |
Scale Tail Gear |
E-clip-x1, 4x18mm wood screw-x2, Spring-x2, Tail gear-x1,
2.6x26mm sink head screw-x1, Steering fork-x1, Wheel spacer-x1,
Plastic washer-x1, Tail wheel-x1, Tire-x1 |
| AS6423 |
Threaded Pushrod Set |
Retract pushrod-x2, Clevis-x4, Throttle pushrod-x1, M2 nut-x4,
Aileron pushrod (L/2), Flap damper (S/2) |
| AS6442 |
Control Horn |
Control horn-x4, Backplate-x4, 2x25mm screw-x8 |
|
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
