|
|
Thunder Tiger - September Fury 1/7th Scale
 |
 click to enlarge | |
Product No. TTR4573 |
MSRP: $ 539.99 |
| |
| Thunder Tiger proudly introduces one of their finest ARF's to date; the highly modified aircraft number 232 September Fury, owned and piloted by Mike Brown. |
| |
| Specification:
Wing Span: 67 3/4" / 1720mm
Length: 60" / 1525mm
Weight: 13 lbs. / 5,900 g.
Req. Engine: .90 - 2 Cycle / 1.20 - 4 Cycle
Req. Radio: 5~8 Channel
|
|
Qualifying at a blistering 468.266 mph to take the third position at the 2002 National Championship Air races (NCAR) and established itself as the fastest Sea Fury in history. Introducing the legendary September Fury with it's great speed to all R/C hobbyists worldwide. Experience this unlimited pylon racer. The fastest Sea Fury!
Features
- Factory Pre-painted fiberglass fuselage and cowl
- Standard equipment 3 blade
- 3 - Blade Aluminum Spinner included
- Covered with Oracover/Ultracote®
- Superlite retract gear with 4.5mm wire included
- Built-up flaps of each wing half
|
Accessories Needed
- Radio Set - Transmitter (5~8 channels), Standard Servos - x5, Optional flaps servos - x2, x1 retract servo (opt),
x2 12' extension wires and x1 "Y" extension wire for aileron, x1 - 6" extension wire for battery, Receiver, Battery, Foam, Rubber Band.
- Engine - Airplane engine (.90 - 2 Cycle / 1.20 - 4 Cycle), Glow Plug, Glow Fuel (15%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
- Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanoacrylate adhesive (thick CA),
10 minute Epoxy (fast), 20 - 30 minute Epoxy (slow).
- Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers,
Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3.4mm), M4x0.7 Tap, Straight building board, Sanding block.
|
Also Available
| Description: |
Muffler Pitts Style |
Product No.: |
TTR9791 |
MSRP: |
$43.99 |
Parts List
| Part No. |
Description |
Contains |
| AS6429 |
Fuselage |
Coveling 200x80mm-x1, VT lower trailing edge-x1, VT upper trailing edge-x1,
Fiberglass cloth-x1, Fuselage-x1, Doubler-x28, CA hinge-x3, Rudder-x1,
2x8mm washer wood screw-x1, FRP cockpit-x1, FRp tail cover-x1,
Rubber band-x2, FRP tube-x1, 2x8mm washer wood screw-x24,
2.3x12mm washer wood screw-x4 |
| AS6428 |
Plywood Parts |
Plywood parts, A, B, C-x1 of each |
| AS6430 |
Main Wing |
Left wing-x1, Right wing-x1, Joiner wire-x2, Joiner tube-x2, Aileron Servo Case
(L/1, R/1), Flap sevo case (L/1, R/1), FRP Wing joiner tube-x1, Dowel-x4,
CA hinge-x14, 3x20mm wood screw-x2, 2.3x12mm washer screw-x16 |
| AS6431 |
Horizontal Tail |
Horizontal tail-x, CA hinge-x6 |
| 3291 |
Aluminum Spinner
(3-Blade) |
Aluminum spinner-x1, Backplate-x1, Bushing-x1, Adaptor-x1, Spinner bolt-x1 |
| 3290 |
Aluminum Spinner
(2-Blade) |
Aluminum spinner-x1, Backplate-x1, Bushing-x1, Adaptor-x1, Spinner bolt-x1 |
| AS6425 |
Elevator Torque Wire |
Torque wire-x1 |
| 3009 |
Superlite Retract |
3x3mm Set screw-x2, Wheel axle-x2, Retracts (L/1, R/1) |
| AS6433 |
Cowling |
2.3x12mm Washer wood screw-x4, Cowling-x1 |
| 3299 |
Wheel |
Wheel-x2 |
| AS6432 |
Canopy |
Canopy-x1, 2x5mm wood screw-x4 |
| 3265 |
Fuel Tank |
Slicone tube-x1, Crank weight-x1, Straight nipple-x1, Stopper-x1, 90° Nipple-x1,
Cap-x1, 480cc Tank-x1 |
| AS6435 |
Pushrods |
Throttle pushrod-x1, Retract pushrod-x2, Flap pushrod-x2, Clevis-x4, M2nut-x4,
Aileron pushrod-x2 |
| AS6441 |
Control Horn |
Control horn (S/4), Control horn (l/2), Backplate-x4, M2 nut-x2, 2.x30mm machine screw-x2, 2x22mm machine screw-x4, 2x15mm machine screw-x4 |
| PE0009 |
EZ Connector |
1.5x hex wrench-x1, EZ connectors-x1, 3x3mm set screw-x1, M2 nut-x1,
M2 washer-x1 |
| 3012 |
Anti-Vibration
Engine Mount |
Mounting beams-x2, 4mm hex wrench-x1, Rubber-x8, T washer-x8, Blind nut-x4,
6/32x20mm socket cap crew-x4, 4x20mm socket cap screw-x4, 5x40mm socket cap screw |
| AS6434 |
Pull-Pull System |
Brass tube-x8, Clevis-x4, Threaded end-x4, M2 nut-x4, Z-bland end-x2, Wire (3.6M/1)-x1 |
| AS6438 |
Scale Tail Gear |
4x10mm sink head screw-x2, 3x5mm set screw-x1, Steering horn-x1,
Wheel spacer-x1, Tail wheel fork-x1, Tail wheel-x1, 2.6x26mm sink head screw,
Blind nut-x2 |
| AS6439 |
Elevator Linkage Set |
Elevator wood pushrod-x1, Pushrod end retainer-x1, Clevis-x2, M2 nut-x2,
Threaded pushrod-x2 |
| AS6436 |
Decal |
Decal A-x1, Decal B-x1, Silver (L/1, R/1) |
| AS6437 |
Retract Decoration |
Wheel door (L/1, R/1), Wheel well (L/1, R/1), Upper retainerA-x2,
Upper Retainer-B-x2, 2.6x5mm wood screw-x2, 2x5mm wood screw-x4,
Lower retainer-x2 |
| AS6440 |
Hardware Set |
Collar-x2, 3x16mm sink head screw-x8, 3x3mm set screw-x2, M2 nut-x2
2x8mm machine screw-x2, Ball end-x2, Ball-x2 |
|
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
