|
|
Thunder Tiger - Piper J-3 Cub
 |
 click to enlarge | |
Product No. TTR4532 |
MSRP: $262.99 |
| |
| One of the most recognized names in aviation history is the Piper J-3 Cub. A child of the Depression, Mr. Piper's Cub began production in the early '30s, evolving into the 65 HP J-3 version in 1939. |
| |
| Specification:
Wing Span:
82.7"
Wing Area: 850 sq in.
Length: 48 "
Weight:
6.5 - 7.5
lbs.
Req. Engine:
.46 -.61 - 2-Cycle
.50 - .91 - 4-Cycle
Req. Radio: 4 Channel
|
|
Proliferating in the years before and during WWII, the Cub has introduced more young men to the joys of flight than any other airplane ever. Now you can own a part of aviation's history and enjoy the relaxing and realistic flight characteristics of the venerable J-3 Cub.
Thunder Tiger's ARF J-3 has been meticulously built from the finest material and covered with UltraCote® in the classic Cub Yellow color scheme. Scale details such as wing struts, landing gear bungees, Cub wheels, accurately contoured fuselage, and faux engine cylinder heads create a head-turning beauty. Only a few hours of enjoyable assembly and you are ready to step back in time and be a part of history by flying the classic, IMAA legal J-3 Cub.
Features
- State-of-the-art engineering that provide quick and easy assembly
- Pre-built and covered with repairable UltraCote®
- Custom-built and covered by skilled craftsmen
- Scale details include wing struts, bungees, Cub wheels, and dummy engine cylinders
- After a few hours of enjoyable assembly and you are ready to fly
- Authentic Piper J-3 Cub color scheme
|
Accessories Needed
- Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band.
- Engine - Airplane engine (.40 to .61 - 2 Cycle), (.50 to .91 - 4 Cycle), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter, 12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
- Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanoacrylate adhesive (thick CA),
10 minute Epoxy (fast), 20 - 30 minute Epoxy (slow), R/C 56 Glue.
- Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers,
Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits, T-pins, Sanding block.
|
Parts List
| Part No. |
Description |
Contains |
| AS6029 |
Fuselage |
Fuselage-x1 |
| 3263 |
Fuel Tank Set |
Silicone tube-x1, Clunk-x1, Fuel stopper-x1, 90° nipple-x1, Nipple-x1,
Cap-x1, 300 cc Tank-x1 |
| AS6030 |
Wing |
Hatch-x2, Wing bolt plate-x1, M2x8mm screw-x8, Wing joiner-x3, Trim tape-x1,
Left wing-x1, Right wing-x1 |
| AS6031 |
Wing Struct |
Wing struct-x2, Mounting plate-x6, M3x5mm screw-x6,
M3x8mm tapping screw-x1 |
| AS6032 |
Horizontal Tail |
Stabililzer-x1, Elevator-x2, 1/8" wire elevator joiner-x1 |
| AS6033 |
Vertical Tail |
Vertical fin-x1, Rudder-x1 |
| AS6034 |
Shrink Tube |
Shrink tube-x4 |
| AS6035 |
AFT Pushrods |
Stab/Rudder pushrods-x2, Clevis-x2 |
| 3152 |
Aileron Pushrods |
Clevis-x2, Threaded rod-x2 |
| 3151 |
Control Horn Set |
Control-x2, Back Plate-x2, M2x15mm-x4 |
| 3101 |
Main Wheel |
Main wheel-x2, Hub cover-x2, M2x11mm-x6, M2x3mm-x6 |
| AS6036 |
Main Landing Gear |
Main landing-x1, Mounting plate-x2, M3x8mm tapping screw-x4, Collar-x4,
Set screw-x4 |
| AS6037 |
Tail Wheel |
Tail gar-x1, Mounting plate-x1, Tail wheel-x1, M3x8mm-x2, Collar-x1,
Set screw-x1 |
| AS6038 |
Landing Gear Fairing |
Landing gear fairing-x1, M2.6x6mm screw-x4, Mounting plate-x4, Nut M2.6-x4,
M3x8mm tapping screw-x4, Zip tie-x2 |
| 3103 |
Engine Mount |
Beams-x2, Engine mount plate-x1, Nylon blot No. 8--32-25mm-x4,
Blind nut No. 8-32-x4, M3x20-x4 |
| AS6045 |
Rubber Spacer |
Rubber spacer-x1 |
| AS6039 |
Canopy |
Canopy-x1 |
| AS6040 |
Cowling |
Cowl-x1, Dummy engine-x1, Exhaust pipe-x1 |
| AS6041 |
Decal |
Registered number decal-x1 |
| AS6042 |
Forward Pushrods |
Wire-x1, Wire guide tube-x1 |
| AS6043 |
Control Horn Set |
Control horn-x2, M2x12mm screw-x4 |
| AS6044 |
Nylon Bolt Set |
Nylon bolt 1/4--20" -- 38mm-x2, Blind nut 1/4--20"-x2 |
|
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2009 Ace Hobby, Inc.
Not responsible for typographic errors.
|
| 
|
