|
|
Thunder Tiger - Velocity II EP
 |
 click to enlarge |
|
Product No. TTR4345-K21 |
MSRP: $ 75.99 |
| |
| Have you ever flown a speedy flying wing? This one you must try. This flying wing constructed of a one-piece wing with fuselage combined which is easy to build. |
| |
| Specification:
Wing Span: 32"
Length: 23.5 "
Wing Area: 263.5 sq. in. (17 dm2)
Weight:
19.8
oz. / 560 g.
Motor: 400 included
Req. Radio: 3 Channel
|
|
This electric powered flying wing is good for modeler who desires speedy flight or combat. Its airfoil, motor package and design planform are intended to maximize performance under those flying conditions and will provide great results for pilots.
This kit has been engineered to go together quickly and easily while still providing you with great looks and exceptional flying performance. It takes less than an hour of installation to complete. Full power and pull straight up, roll fast, low pass, combat or any wild aerobatics you can think of, the Velocity is a speed machine. Own a Velocity, and you will have supremacy on deck or at high altitude at your local field.
Features
- Quick-Move-n-Attach simulated carbon faux canopy
- EPO material foam wing with fuselage
- Hand launch grips at bottom fuselage
- Slick appearance with bright decals
- Perfect EP speedy flyer for intermediate and pro modelers
|
Accessories Needed
- Radio Set - Transmitter (3 channels), Micro Servos - x2, Receiver, Battery.
- Propulsion System - Electronic Motor Controller (Speed Control) for x3 channel radio, Flight Battery 9.6V 1200 mAh NiMH, Quick Charger.
- Adhesives - Instant setting Cyanoacrylate adhesive (thin CA).
- Tools - Ruler, Hobby knife and blades, Scissors, Curved Scissors, Fine-point or felt-tip pen,Small phillips and
flat head screw drivers, Drill bits, Paper Towels, Medium grit sandpaper, Mixing sticks for epoxy.
|
Parts List
| Part No. |
Description |
Contains |
| AS6582 |
Foam Wing |
Foam Wing-x1, Hatch cover (L/1, R/1), Velcro-x1 |
| AS6349 |
Decal |
Decal Velocity II EP (L/1, R/1) |
| AS6339 |
Vertical Fin |
Vertical Fin (L/1, R/1) |
| AS6345 |
Linkage |
Control Horn-x2, Pushrod-x2, Clevis-x2 |
| AS6583 |
Propeller Hub |
Propeller drive nut-x1, .05 Hex wrench-x1, Propeller drive shaft-x1,
4-40 x 1/8" Set screw-x1 |
| AS6346 |
Skid And Tube |
PVC tube-x1, Wood skid-x1 |
| AS6584 |
Motor Mount |
Plywood part A-x1, B-x1, C-x1 and D-x2, Washer-x4, M3x8 screw-x4 |
| AS6342 |
Nose Cone |
Nose Cone-x1 |
| TTR2358 |
OBL Motor |
Outrunnner Brushless Motor 29/27-07A-x1 |
| AS6340 |
PVC Deck |
Deck-x1, Velcro-x1 |
| AS6341 |
SIM Carbon Canopy |
Canopy-x1 |
|
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
