| |
MRP - Voyager 1 Meter Racing Yacht
 |
 click to enlarge | |
Product No. MRP5559 |
MSRP: $209.99 |
| |
For Centuries, the call of the sea has beckoned those intrepid
souls that long for the thrill, adventure, and mystery of sailing.
Your destiny lies in model sailing with the MRP Voyager. |
| |
| Specification:
Length: 1 m. / 39.4 in.
Mass Height: 1320mm / 52 in.
Sail Area : 39 dm. sq. / 600 sq. in.
Beam: 220mm / 8.6 in.
Weight: 3.3 Kg / 7 lbs.
|
|
Beauty and grace are abundant in the confident lines of this fine vessel, from the sails and deck all the way down to the keel. You will be proud to take this beauty to the dock or display it at home or in your office.
The blow-molded hull and deck are pre-joined and the rudder and keel are installed to make this boat go together smoothly and quickly. Deck stanchions and rails, bow and stern pulpits, and scale rigging fittings make your Voyager look just like the real thing. Performance is enhanced with the ability for you to "reef-down" the main sail and roll-in the jib for high wind conditions that will keep other boats off the water.
Features
- Completely Factory Built ABS Hull
- Low Drag Hydrodynamic Ballast
- Light & Strong Carbon Fiber Mast & Boom
- High Performance Racing Sails
- National Flags & Decal Supplied
- Wood Display Stand Included
|
Accessories Needed
- Radio Set - 2 channel radio and battery pack, x2 standard servo, Receiver
-
Adhesives - Instant setting Cyanoacrylate adhesive (thin CA)
- Tools - Needle nose pliers, Phillips screwdrivers (med), Hobby knife, Scissors, Drill Bits (1/16",1.6mm),
Rubbing alcohol
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
