| |
Team Associated - RC12L4 1:12th Electric Pan car
 |
 click to enlarge | |
Product No. AE4017 |
MSRP: $ 299.99 |
| |
| "Like so many of Associated's cars, beginners buy it because of its reputation, and then find it is easy to drive - right up to World Championship level."- Radio Control Car Racer May 2005 |
| |
|
Team Associated's championship-winning 1:12 scale kit is now optimized for 4-cell competition, and has been given the full Factory Team options package. We started with a redesigned graphite chassis, now flat-fronted with twin mini-bumpers for impact-damage resistance, and with tweak reference center holes already drilled in.
The steering servo mounts are all new Factory Team blue aluminum items with multiple mounting points to fit most servos.
The front suspension has been redesigned with new upper arm mounts which allow 0, 5, or 10 degrees of reactive caster. The precision-ground upper hinge pin is now secured with two set screws, and cross-support is provided with a floating carbon fiber cross brace.
The RC12L4 features unique molded adjustable battery trays which allow the cells to sit as low as possible in the chassis, without having to file the graphite chassis battery cutouts. These trays provide approximately .150" (4mm) of battery movement to shift the weight of the cells forward for more steering, or backward for more rear traction.
The blue 7075 T-6 aluminum rear hubs are all new, with a single-clamp style left hub, and a dual-bearing supported right diff hub featuring the large "D" style locking diff rings (allowing the greater diameter ball pattern) as preferred by most of our Team drivers. The graphite-thru, Pro-style rear axle is from IRS.
The rear suspension has also been optimized for 4-cell competition, using a single VCS Micro-Shock, a thicker, more rigid upper graphite pod plate, and your choice of two included fiberglass T-bars, .063 or .075".
Associated's winning record in 1:12 scale competition is unequalled, and the new 12L4 was designed with input from many of the top 1:12 scale racers in the world, including Mike Blackstock, winner and T.Q. of the 2004 Snowbirds Race, and Jon Orr, winner of the 2004 U.S. Indoor Championships at Cleveland.
Note: 1:12 scale Lexan body, wheels, tires, radio system, pinion gear are not included.
Features
- Dynamic strut front end now comes with 0°, 5°, and 10° arm mounts.
- Titanium turnbuckles.
- Lightweight aluminum screws.
- Adjustable servo mounts allows use of different size servos
- Graphite chassis features adjustable x4-cell battery trays.
- VCS™ Micro Shock with its volume compensating system.
- NEW 3-bolt clamping hub design.
- Factory Team graphite axle.
- New large D-ring differential.
- Kimbrough spur gear.
|
Accessories Needed
- Radio Set - 2 Channel radio, x2 High Torque servos, Receiver and battery pack.
- Propulsion sytem - Battery pack (x4 cell saddle pack only.), Battery charger, ESC (Electronic Speed Control)
and Electric motor.
- Extra Items - Pinion gear, 64 pitch. Size to be determined by type and wind of motor, 1:12 scale Lexan body,
1:12 scale wheels and tires fitting 3-hole hub.
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law. All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
|
|