|
|
Ace R/C - Cloud Dancer 40 ARF
 |
 click to enlarge | |
Product No. ACE4542 |
MSRP: $ 230.99 |
| |
| This kit features state-of-the-art engineering that provides quick and easy assembly of a strong, yet lightweight airplane that will give you an enjoyable and thrilling experience. |
| |
| Specification:
Wing Span: 60"
Length: 46.75"
Weight: 4 lbs
Req. Engine: .40 - .46 - 2 Cycle
.40 - .54 - 4 Cycle
Req. Radio: 4 Channel
|
|
One of the finest 40 sized sport planes available. Designed by the late Fred Reese, this airplane offers a unique appearance and sprightly, yet predictable performance.
Cloud Dancer sports a double-tapered wing, a unique diamond-shaped tail group wide-stance landing gear and wheel pants, and sleek fuselage with bubble canopy. All of which results in a truly handsome airplane of which you can be proud. Install the optional retractable landing gear, and watch the Cloud Dancer transform into the next level of awesome performance and good looks. Available in both a 40 size and a 60 size, the Cloud Dancer comes Almost-Ready-To-Fly; completely built from balsa/ply and skillfully covered with UltraCote®.
Features
- Skillfully built from balsa/ply and covered with UltraCote®
- State-of-the-art engineering that provides quick and easy assembly
- Sleek lines and tapered wing provides clean, smooth performance
- Set-up for fixed gear or optional retracts
- Available in 40 size or 60 size
- Smooth flying airplane for first time low wing pilot
- Bright covering scheme makes it easy to track in the sky
|
Accessories Needed
- Radio Set - Transmitter (4 channels), Standard Servos - x5, Receiver, Battery, Foam, Rubber Band.
- Engine - Airplane engine (PRO-46 or F-54s), Glow Plug, Glow Fuel (10% - 15%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
- Adhesives - 5 minute Epoxy (4 ounces), 30 minute Epoxy (4 ounces), "Thin" Instant adhesive (1/2 ounces),
"Thick" Instant adhesive (1/2 ounces), Epoxy mixing sticks or brushes
- Tools - Ruler, Hobby knife and blades, 90 degree triangle, Rubbing alcohol, Paper towels, Waxed paper, Masking tape, Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3/32", 5/32", 3/16").
|
Parts List
| Part No. |
Description |
Contains |
| AS6128 |
Fuselage |
Fuselage-x1 |
| AS6129 |
Wing Set |
Left wing-x1, Right wing-x1, Trim tape L/S-x1 each, Center rib-x2
Wing joiner-x3, Retract servo mount-x2, Torque horn-x2, CA hinge-x6
Wing protector-x1, Aileron servo tray-x1, Wing bolt-x2, Washer-x2 |
| AS6134 |
Pushrods |
Stab pushrod-x1, Rudder pushrod-x1, Plastic guide tube-x1, Steel clevis-x5
Aileron pushrod-x2, 0.05" Metal piano wire-x1 |
| 3262 |
Fuel Tank |
Silicone tube-x1, Straight nipple-x1, Rudder stopper-x1, Clunk-x1, Cap-x1
90-degree nipple-x1, 240cc Fuel tank-x1 |
| AS6136 |
Decal |
Cloud dancer decals |
| 3282W |
Spinner Set |
Self-tapping screw-x2, Spinner back plate-x1, Spinner-x1 |
| PE0009 |
Hardware Set |
Pushrod connecto-x1, Allen wrench-x1, 2mm Hex nut-x, 3x3mm Set screw-x1 |
| AS6130 |
Tail Feathers |
H. stab/elevator-x1, CA hinge-x7, V. fin/rudder-x1 |
| 3296 |
Wheel |
57mm 2 1/4" Wheel-x2 |
| AS6131 |
Cockpit/Canopy |
Cockpit-x1, Canopy-x1, Trim tape-x2 |
| 3102 |
Adjustable Engine
Mount |
Beam (L/R)-x1 each, Engine mount plate-x1, 6/32 x 18mm screw-x4,
3mmx15mm Self-tapping screw-x4 |
| AS6007 |
Tail Gear Set |
Tail gear-x1, 3mmx8mm Self-tapping screw-x1, Collar-x1,
3mmx3mm Set screw-x1, Tail wheel-x1, 3mmx15mm Self-tapping screw |
| AS6132 |
Cowl |
2mmx8mm Self-tapping screw-x4, Cowl-x1 |
| AS6100 |
Control Horn |
2mmx15mm screw-x6, Back plate-x3, Control horn-x3 |
| AS6135 |
Landing Gear Set |
3mmx3mm Set screw-x4, 3mmx8mm Self-tapping screw-x8, Mounting strap-x4,
Collar-x1, Landing gear mount-x2, Strut-x2 |
| PE0585 |
Wheel Pant Set |
Mounting strap-x2, 3mm Locknut-x4, Wheelpant (L/R)-x1 each,
3mmx6mm screw-x4 |
| AS6133 |
Wheel Well |
Wheel well-x2 |
| AS6137 |
Retract Hardware
Set |
2mm nut-x2, Steel clevis-x2, 3mmx3mm set screw-x2, Linkage rod-x2
3mmx10mm Retract mounting screw-x8, Collar-x2 |
|
|
|
|
Address: 26021 Commercentre, Lake Forest, CA 92630 | Office Hours: Monday - Friday 7:30am - 4:30pm P.T.
Phone: 949.900.3300 | Fax: 949.900.3301 | Customer Service: 866.322.7121
|
This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2008 Ace Hobby Distributors, Inc.
Not responsible for typographic errors.
|
| 
|
